Oil Sealed Vane Vacuum Pumps

Product Details:

Type : Oil Sealed  Vane Vacuum  Pumps.Model No : DC4D No of Stages : 2  Flow Rate : 6.5 m3/hrPressure (Absolute): 0.0005 mbarMotor Power : 0.75 kw
R and D series high vacuum pumps are used when the final absolute pressure required is very low. These pumps may run continuously connected to closed containers to be emptied, and may not run continuously at length, at atmospheric pressure. The exhaust from these pumps is not filtered, thus, special purifiers are available for fumes.The operating principle of these pumps is similar to the lubricated pumps. However, in this case, the stator is immersed in the lubrification oil which has also the function of sealing the air loss. The pressure levels reached by this type of pumps are higher than any other rotary vane pump. These pumps are equipped with a Gas Ballast system to avoid the condensation of the water vapour.Very high reliability, vibration free, low noise level and easy maintenance are the main features of this series that make it suitable for laboratories, research institutes and universities.A coupling drive connecting motor and pump ensures reliable operation, long life and easy maintenance.Moreover, this series is ideal for use as backing pump on ultra-high vacuum units.Standard equipment includes:On/off switch (1~ only)Cable without plug (1~ only)Thermal protector (1~ only)Gas BallastHandle for transportShock mountsPack of SW100 oilHydraulic non-return system

Product Details:

Type : Oil Sealed Vane Vacuum Pumps.Model No : RC2D No of Stages : 2 Flow Rate : 2 m3/hrPressure (Absolute): 0.5 mbarMotor Power : 0.12 kw
R and D series high vacuum pumps are used when the final absolute pressure required is very low. These pumps may run continuously connected to closed containers to be emptied, and may not run continuously at length, at atmospheric pressure. The exhaust from these pumps is not filtered, thus, special purifiers are available for fumes.The operating principle of these pumps is similar to the lubricated pumps. However, in this case, the stator is immersed in the lubrification oil which has also the function of sealing the air loss. The pressure levels reached by this type of pumps are higher than any other rotary vane pump. These pumps are equipped with a Gas Ballast system to avoid the condensation of the water vapour.These kind of pumps can be made of a single rotor-stator group and are called Single Stage; or they can be made of two rotor-stator groups connected in series so the first group drain is connected to the second group intake system. The latter are called Double Stage.The main application fields include: refrigeration and air conditioning systems, laboratory applications, freeze-drying, spectrometry and ultracentrifugation. Special Pneurop fittings are available to connect the various elements of the system.The models were specifically designed for refrigeration and conditioning applications.The double stage and the single stage constructions provide optimal final pressure.The industrial monobloc design with the rotor directly assembled on the motor shaft and the use of light-weight alloys mean that this series of pumps is of limited size and weight and can be fitted into a limited space, provided there is good ventilation or that they are assembled on mobile equipment.Standard equipment includes:Thermal protector (1~ only)Handle for transportGas ballast (only RC.2D and RC.3M)On/off switch and cable with schuko plug (1~ only)Oil check valvePack of oilShock mount (only RD.2D)

Product Details:

Type : Oil Sealed  Vane Vacuum  Pumps.Model No : DC16DEX No of Stages : 2  Flow Rate : 17 m3/hrPressure (Absolute): 0.0005 mbarMotor Power : 0.75 kw
R and D series high vacuum pumps are used when the final absolute pressure required is very low. These pumps may run continuously connected to closed containers to be emptied, and may not run continuously at length, at atmospheric pressure. The exhaust from these pumps is not filtered, thus, special purifiers are available for fumes.The operating principle of these pumps is similar to the lubricated pumps. However, in this case, the stator is immersed in the lubrification oil which has also the function of sealing the air loss. The pressure levels reached by this type of pumps are higher than any other rotary vane pump. These pumps are equipped with a Gas Ballast system to avoid the condensation of the water vapour.
Very high reliability, vibration free, low noise level and easy maintenance are the main features of this series that make it suitable for laboratories, research institutes and universities.A coupling drive connecting motor and pump ensures reliable operation, long life and easy maintenance.Moreover, this series is ideal for use as backing pump on ultra-high vacuum units.Standard equipment includes:On/off switch (1~ only)Cable without plug (1~ only)Thermal protector (1~ only)Gas BallastHandle for transportShock mountsPack of SW100 oilHydraulic non-return system
Modello conforme alla direttiva comunitaria 94/9/CE (ATEX) con marcatura CE ex II 3/-GIIC c T4X (Atex interna)

Product Details:

Type : Oil Sealed  Vane Vacuum  Pumps.Model No : RC50M No of Stages : 1  Flow Rate : 50 m3/hrPressure (Absolute): 0.005 mbarMotor Power : 1.1 kw
R and D series high vacuum pumps are used when the final absolute pressure required is very low. These pumps may run continuously connected to closed containers to be emptied, and may not run continuously at length, at atmospheric pressure. The exhaust from these pumps is not filtered, thus, special purifiers are available for fumes.The operating principle of these pumps is similar to the lubricated pumps. However, in this case, the stator is immersed in the lubrification oil which has also the function of sealing the air loss. The pressure levels reached by this type of pumps are higher than any other rotary vane pump. These pumps are equipped with a Gas Ballast system to avoid the condensation of the water vapour.These kind of pumps can be made of a single rotor-stator group and are called Single Stage; or they can be made of two rotor-stator groups connected in series so the first group drain is connected to the second group intake system. The latter are called Double Stage.The main application fields include: refrigeration and air conditioning systems, laboratory applications, freeze-drying, spectrometry and ultracentrifugation. Special Pneurop fittings are available to connect the various elements of the system.Reduced noise and easy maintenance are the main characteristics of this series making the pump particularly suitable for the refrigeration and air-conditioning sector; industrial centrifugal machines, precious metal vacuum casting machines and airlocks.A direct drive coupling connects motor and pump and ensures a reliable operation, long life and easy maintenance; moreover, the damping and recovery system, equipped with a by-pass valve, ensures the absence of oil vapours at the outlet.Standard equipment includes:Gas BallastShock mountsOil check valvePack of SW60 oilExhaust mist eliminator

Product Details:

4GP1 single stage max vacuum 0.5 MbarAbs
Made in Italy 

Additional Information:

• Delivery Time: Ex stock mumbai
• Packaging Details: Box

Product Details:

Type : Oil Sealed  Vane Vacuum  Pumps.Model No : RC4M No of Stages : 1  Flow Rate : 4.3 m3/hrPressure (Absolute): 0.1 mbarMotor Power : 0.37 kw
R and D series high vacuum pumps are used when the final absolute pressure required is very low. These pumps may run continuously connected to closed containers to be emptied, and may not run continuously at length, at atmospheric pressure. The exhaust from these pumps is not filtered, thus, special purifiers are available for fumes.The operating principle of these pumps is similar to the lubricated pumps. However, in this case, the stator is immersed in the lubrification oil which has also the function of sealing the air loss. The pressure levels reached by this type of pumps are higher than any other rotary vane pump. These pumps are equipped with a Gas Ballast system to avoid the condensation of the water vapour.These kind of pumps can be made of a single rotor-stator group and are called Single Stage; or they can be made of two rotor-stator groups connected in series so the first group drain is connected to the second group intake system. The latter are called Double Stage.The main application fields include: refrigeration and air conditioning systems, laboratory applications, freeze-drying, spectrometry and ultracentrifugation. Special Pneurop fittings are available to connect the various elements of the system.These models were specifically designed for the Air conditioning and refrigeration sector and for laboratory applications.The single or double stage version provide optimal final pressure.A coupling drive connecting motor and pump ensures reliable operation, long life and easy maintenance.Standard equipment includes:Thermal protector (135°C 1~ only)Handle for transportGas BallastOn/off switch (1~ only)Cable with schuko plug (1~ only)Check valve (RC.4M)/ Venting system (RC.4D)Pack of AV68 oilShock mountsA version suitable for connection with standard electric motors M71/4 B14 according to IEC-72 is also available. 

Product Details:

Type : Oil Sealed  Vane Vacuum  Pumps.Model No : DB2D No of Stages : 2  Flow Rate : 2.4 m3/hrPressure (Absolute): 0.005 mbarMotor Power : 2.5 kw
R and D series high vacuum pumps are used when the final absolute pressure required is very low. These pumps may run continuously connected to closed containers to be emptied, and may not run continuously at length, at atmospheric pressure. The exhaust from these pumps is not filtered, thus, special purifiers are available for fumes.The operating principle of these pumps is similar to the lubricated pumps. However, in this case, the stator is immersed in the lubrification oil which has also the function of sealing the air loss. The pressure levels reached by this type of pumps are higher than any other rotary vane pump. These pumps are equipped with a Gas Ballast system to avoid the condensation of the water vapour.These kind of pumps can be made of a single rotor-stator group and are called Single Stage; or they can be made of two rotor-stator groups connected in series so the first group drain is connected to the second group intake system. The latter are called Double Stage.Very high reliability, vibration free, low noise level and easy maintenance are the main features of this series that make it suitable for laboratories, research institutes and universities.A coupling drive connecting motor and pump ensures reliable operation, long life and easy maintenance.Moreover, this series is ideal for use as backing pump on ultra-high vacuum units.Standard equipment includes:On/off switch (1~ only)Amperometric circuit breaker (manual reset; 1~ only)Cable with schuko plug (1~ only)Gas BallastHandle for transportShock mountsPack of SW60 oilSolenoid-pneumatic non-return system

Product Details:

Type : Oil Sealed  Vane Vacuum  Pumps.Model No : DC8D No of Stages : 2  Flow Rate : 9 m3/hrPressure (Absolute): 0.0005 mbarMotor Power : 0.75 kw
R and D series high vacuum pumps are used when the final absolute pressure required is very low. These pumps may run continuously connected to closed containers to be emptied, and may not run continuously at length, at atmospheric pressure. The exhaust from these pumps is not filtered, thus, special purifiers are available for fumes.The operating principle of these pumps is similar to the lubricated pumps. However, in this case, the stator is immersed in the lubrification oil which has also the function of sealing the air loss. The pressure levels reached by this type of pumps are higher than any other rotary vane pump. These pumps are equipped with a Gas Ballast system to avoid the condensation of the water vapour.Very high reliability, vibration free, low noise level and easy maintenance are the main features of this series that make it suitable for laboratories, research institutes and universities.A coupling drive connecting motor and pump ensures reliable operation, long life and easy maintenance.Moreover, this series is ideal for use as backing pump on ultra-high vacuum units.Standard equipment includes:On/off switch (1~ only)Cable without plug (1~ only)Thermal protector (1~ only)Gas BallastHandle for transportShock mountsPack of SW100 oilHydraulic non-return system

Product Details:

Type : Oil Sealed  Vane Vacuum  Pumps.Model No : DC16D No of Stages : 2  Flow Rate : 17 m3/hrPressure (Absolute): 0.0005 mbarMotor Power : 0.75 kw
R and D series high vacuum pumps are used when the final absolute pressure required is very low. These pumps may run continuously connected to closed containers to be emptied, and may not run continuously at length, at atmospheric pressure. The exhaust from these pumps is not filtered, thus, special purifiers are available for fumes.The operating principle of these pumps is similar to the lubricated pumps. However, in this case, the stator is immersed in the lubrification oil which has also the function of sealing the air loss. The pressure levels reached by this type of pumps are higher than any other rotary vane pump. These pumps are equipped with a Gas Ballast system to avoid the condensation of the water vapour.Very high reliability, vibration free, low noise level and easy maintenance are the main features of this series that make it suitable for laboratories, research institutes and universities.A coupling drive connecting motor and pump ensures reliable operation, long life and easy maintenance.Moreover, this series is ideal for use as backing pump on ultra-high vacuum units.Standard equipment includes:On/off switch (1~ only)Cable without plug (1~ only)Thermal protector (1~ only)Gas BallastHandle for transportShock mountsPack of SW100 oilHydraulic non-return system

Product Details:

Type : Oil Sealed  Vane Vacuum  Pumps.Model No : RC4D No of Stages : 2  Flow Rate : 4.3 m3/hrPressure (Absolute): 0.01 mbarMotor Power : 0.37 kw
R and D series high vacuum pumps are used when the final absolute pressure required is very low. These pumps may run continuously connected to closed containers to be emptied, and may not run continuously at length, at atmospheric pressure. The exhaust from these pumps is not filtered, thus, special purifiers are available for fumes.The operating principle of these pumps is similar to the lubricated pumps. However, in this case, the stator is immersed in the lubrification oil which has also the function of sealing the air loss. The pressure levels reached by this type of pumps are higher than any other rotary vane pump. These pumps are equipped with a Gas Ballast system to avoid the condensation of the water vapour.These kind of pumps can be made of a single rotor-stator group and are called Single Stage; or they can be made of two rotor-stator groups connected in series so the first group drain is connected to the second group intake system. The latter are called Double Stage.The main application fields include: refrigeration and air conditioning systems, laboratory applications, freeze-drying, spectrometry and ultracentrifugation. Special Pneurop fittings are available to connect the various elements of the system.These models were specifically designed for the Air conditioning and refrigeration sector and for laboratory applications.The single or double stage version provide optimal final pressure.A coupling drive connecting motor and pump ensures reliable operation, long life and easy maintenance.Standard equipment includes:Thermal protector (135°C 1~ only)Handle for transportGas BallastOn/off switch (1~ only)Cable with schuko plug (1~ only)Check valve (RC.4M)/ Venting system (RC.4D)Pack of AV68 oilShock mountsA version suitable for connection with standard electric motors M71/4 B14 according to IEC-72 is also available. 

Product Details:

Type : Oil Sealed  Vane Vacuum  Pumps.Model No : RC8M No of Stages : 1  Flow Rate : 8.5 m3/hrPressure (Absolute): 0.1 mbarMotor Power : 0.37 kw
R and D series high vacuum pumps are used when the final absolute pressure required is very low. These pumps may run continuously connected to closed containers to be emptied, and may not run continuously at length, at atmospheric pressure. The exhaust from these pumps is not filtered, thus, special purifiers are available for fumes.The operating principle of these pumps is similar to the lubricated pumps. However, in this case, the stator is immersed in the lubrification oil which has also the function of sealing the air loss. The pressure levels reached by this type of pumps are higher than any other rotary vane pump. These pumps are equipped with a Gas Ballast system to avoid the condensation of the water vapour.These kind of pumps can be made of a single rotor-stator group and are called Single Stage; or they can be made of two rotor-stator groups connected in series so the first group drain is connected to the second group intake system. The latter are called Double Stage.The main application fields include: refrigeration and air conditioning systems, laboratory applications, freeze-drying, spectrometry and ultracentrifugation. Special Pneurop fittings are available to connect the various elements of the system.These models were specifically designed for the Air conditioning and refrigeration sector and for laboratory applications.The single or double stage version provide optimal final pressure.A coupling drive connecting motor and pump ensures reliable operation, long life and easy maintenance.In the case start-ups under vacuum, a three-way solenoid valve must be installed, otherwise a specific version must be requested.Standard equipment includes:Thermal protector (135°C 1~ only)Handle for transportGas BallastOn/off switch (1~ only)Cable with schuko plug (1~ only)Check valve (RC.8M) / Venting system (RC.8D)Pack of AV68 oilShock mountsA version suitable for connection with standard electric motors M71/4 B14 according to IEC-72 is also available.

Product Details:

Type : Oil Sealed  Vane Vacuum  Pumps.Model No : RC8D No of Stages : 2  Flow Rate : 8.5 m3/hrPressure (Absolute): 0.01 mbarMotor Power : 0.37 kw
R and D series high vacuum pumps are used when the final absolute pressure required is very low. These pumps may run continuously connected to closed containers to be emptied, and may not run continuously at length, at atmospheric pressure. The exhaust from these pumps is not filtered, thus, special purifiers are available for fumes.The operating principle of these pumps is similar to the lubricated pumps. However, in this case, the stator is immersed in the lubrification oil which has also the function of sealing the air loss. The pressure levels reached by this type of pumps are higher than any other rotary vane pump. These pumps are equipped with a Gas Ballast system to avoid the condensation of the water vapour.These kind of pumps can be made of a single rotor-stator group and are called Single Stage; or they can be made of two rotor-stator groups connected in series so the first group drain is connected to the second group intake system. The latter are called Double Stage.The main application fields include: refrigeration and air conditioning systems, laboratory applications, freeze-drying, spectrometry and ultracentrifugation. Special Pneurop fittings are available to connect the various elements of the system.These models were specifically designed for the Air conditioning and refrigeration sector and for laboratory applications.The single or double stage version provide optimal final pressure.A coupling drive connecting motor and pump ensures reliable operation, long life and easy maintenance.In the case start-ups under vacuum, a three-way solenoid valve must be installed, otherwise a specific version must be requested.Standard equipment includes:Thermal protector (135°C 1~ only)Handle for transportGas BallastOn/off switch (1~ only)Cable with schuko plug (1~ only)Check valve (RC.8M) / Venting system (RC.8D)Pack of AV68 oilShock mountsA version suitable for connection with standard electric motors M71/4 B14 according to IEC-72 is also available.